Page 2
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com...
Page 3
For products intended to operate from battery power, or other sources, refer to the operating instructions. PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com...
Notes: The following instructions assume you have a programming remote, have correctly mounted the TV, and connected a coax cable that provides both power and RF signal. Use the PDi programming remote (Part Number PD108-420), that must be ordered separately.
Aliases. Press SETUP to return to the previous menu. Additional Channel Settings Please see the user manual, available at https://www.pdiarm.com/document-library-access for instructions on additional channel configurations. PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870 www.pdiarm.com www.mymedTV.com...
TV to a USB memory stick (thumb drive) and then uploading the setup information to another TV. Alternatively, clone files can be loaded to the RF-HEMiS Head-end TV Server by PDi and distributed to other TVs.
Springboro, Ohio location, at its discretion, the whole or any component part of any product manufactured by PDi and found by PDi to be defective. If the decision is made to replace the product, PDi will exchange the model for the same model or a model similar in form and function.
Page 8
As a condition to obtaining warranty service, written notification of the defective product must be received by PDi within ten (10) days of noticing the defect. Repair of said product requires it to be shipped to the PDi factory in Springboro, Ohio. All shipments shall be F.O.B.
Need help?
Do you have a question about the medTV16 and is the answer not in the manual?
Questions and answers