Care And Maintenance - Britax Steelcraft Zapo Manual

CARE AND MAINTENANCE

• To prolong the life of your stroller keep it clean and do not leave it in
the direct sunlight or in the car boot for extended periods of time.
• Removable fabric covers and trims may be cleaned using warm water
with a household soap or mild detergent. Allow it to dry fully,
preferably away from the direct sunlight.
• Non removable fabric covers and trims may be spot cleaned using a
damp sponge with soap or a mild detergent. Allow it to dry completely
before folding or storing it away.
• In some climates the covers and trims may be affected by mould and
mildew. To help prevent this occurring, do not fold or store the product
if it is damp or wet. Always store the product in a well ventilated area.
• When using your stroller at the beach - completely clean your stroller
afterwards to remove the sand and salt from the mechanisms and
wheel assembly. Sand and salt will cause premature wear and
corrosion.
• If there are compression marks on the tyres - Use a domestic hair dryer
to gently warm (DO NOT OVERHEAT) the tyre and the compression
marks should slowly disappear.
• Always check parts regularly for tightness of screws, nuts, and other
fasteners - tighten if required. To maintain the safety of your nursery
product, seek prompt repairs for bent, torn, worn or broken parts.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
35