(Operator) and another volume control for the down-link (Chamber). Designed for a long and dependable service life, the 2810E-ATEX is housed in a rugged IEC Class 1, Zone 2 rated cast aluminum enclosure. The communicator comes standard with an 8 ohm MEDC ATEX rated speaker.
Model 2810E-ATEX Dual Lock, ATEX Rated Chamber Communicator MODEL 2810E-ATEX - FRONT PANEL All of the controls for the Model 2810E-ATEX are located on the front panel with the electrical connections for power and the chamber accessible via cable located at the bottom of the enclosure.
Model 2810E-ATEX Dual Lock, ATEX Rated Chamber Communicator ACCESSORIES Amron produces a series of accessories designed to operate with the 2810E-ATEX chamber communicator. AMRON STANDARD HEADSET - MODEL 2460-31R This light and comfortable headset is designed to extended wear by chamber occupants. The Model 2460-31R features an adjustable boom microphone, vinyl cushioned adjustable ear pads and a spiral cord that can be extended up to 8 feet (2.4 meters).
Model 2810E-ATEX Dual Lock, ATEX Rated Chamber Communicator CONTROLS AND CONNECTIONS Before using the 2810E-ATEX chamber communicator, the operator should be familiar with all the controls and connections. While reading this manual, you will find capitalized words such as PANEL SPEAKER.
Model 2810E-ATEX Dual Lock, ATEX Rated Chamber Communicator FRONT PANEL CONTROLS The following controls and connections are located on the front panel of the 2810E-ATEX. 4.1.1 POWER SWITCH – Turns the power on/off to the communicator. It does not affect the chamber light power.
Page 10
Model 2810E-ATEX Dual Lock, ATEX Rated Chamber Communicator 4.2.5 EARTH GROUND – Black & white twisted wire pair that connects to the earth or safety ground. The chassis can be connected to earth ground using either this wire or the external grounding lug located on the right side of the chassis.
LOCK SELECTOR SWITCH to the INNER position and slowly turn up the OPERATOR VOLUME. Verify you can hear the chamber occupant through the HORN SPEAKER of the 2810E-ATEX. Press the PUSH-TO-TALK BUTTON and verify the operator can talk to the chamber occupant. Adjust the LOCK VOLUME control as necessary.
2810E-ATEX chamber communicator. GENERAL MAINTENANCE The 2810E-ATEX chamber communicator is designed to provide years of continuous, failure- free service when properly used and maintained. One of the most important things that can be done to extend the service life is to clean the communicator after use or when needed. If the equipment is on an extended work program, have the tender clean the equipment during slow work periods.
Page 13
If this solves the issue, then the communication cable in the original umbilical is damaged and needs to be replaced or repaired. If none of these solutions fixes the problem then contact Amron per section 2.2 for further assistance.
If no communication is heard inside the chamber locks, there could be a broken wire inside the chamber communicator. Open the front panel and inspect. If that does not resolve the problem then contact Amron per section 2.2 for further assistance.
Model 2810E-ATEX Dual Lock, ATEX Rated Chamber Communicator PARTS LISTS The parts lists include both mechanical and electrical parts. The following information will be useful in interpreting data which is not self-explanatory. REVISIONS The parts lists in this manual are for the current model of diver communicator as of the printing date.
Model 2810E-ATEX Dual Lock, ATEX Rated Chamber Communicator MODEL 2810E-ATEX TOP ASSEMBLY Reference Part Number Description 520-0006-01 Enclosure, Model 2810E-ATEX 100-0001-01 Speaker, MEDC, ATEX, 8 Watt, 8 Ohm 570-1000-03 PCA for Chamber Communicator 520-0007-01 Power Supply, DIN MINI-PS, 12-24 DC...
Amron’s literature covering this product. Oxygen Treatment Hoods and accessories are excluded and limited to 90 days. Amron’s obligation under this warranty is limited to the repair of or replacement, at Amron’s option, of defective material. This warranty shall not cover defects which are the result of misuse, negligence, accident, repair or alterations.
Need help?
Do you have a question about the 2810E-ATEX and is the answer not in the manual?
Questions and answers