Advertisement
IS7 User Manual
Version 1.0
•
Distribution Date: June 1st, 2018
•
Copyright 2019 by Adamson Systems Engineering Inc.; all rights reserved
This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe
place and make it available upon request to any operator.
Resale of this product must include a copy of this manual.
If this manual becomes damaged or additional copies are needed, please email support@adamsonsystems.com.
Declarations
CE Declaration of Conformity
ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario,
Canada
T: +1 905 982 0520, F: +1 905 982 0609
Email: info@adamsonsystems.com
Website: www.adamsonsystems.com
Adamson Systems Engineering declares that the prod-
ucts stated below are in conformance with the relevant
fundamental health and safety criteria of the applicable
EC Directive(s), in particular:
Directive 2006/95/EC: Low Voltage Directive
971-0003 IS7
971-0004 IS7b
992-0010 IS118
992-0011 IS118b
Directive 2006/42/EC: Machinery Directive
930-0026 IS7 & IS118 Support Frame
930-0021 S-Series Extended Beam
930-0022 S-Series Moving Point Extended Beam
930-0030 IS7 Micro Frame
932-0037 H-Clamp
Established at Port Perry, ON. CA - June 1st, 2017
------------------------------------------------
Brock Adamson (President & CEO)
Advertisement
