Download Print this page

Advertisement

Quick Links

Table of Contents
Safety & Warnings
Read these instructions, keep them available for reference.
This manual can be downloaded from
Heed all warnings and follow all instructions.
A qualifi ed technician must be present during the installation and use of this product. This product
is capable of producing extremely high sound pressure levels and should be used according to the
specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will
not be liable for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such as when the
loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not
operate normally. Inspect your products regularly for any visual or functionality irregularities.
Protect the cabling from being walked on or pinched.
View the S-Series Rigging Tutorial video and/or read the S-Series Rigging Manual before suspending
the product.
Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual.
Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker
system.
This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around
the enclosure with data storage devices such as hard drives.
In an effort to continuously improve its products, Adamson releases
updated accompanying software, presets and standards for its products.
Adamson reserves the right to change the specifications of its
products and the content of its documents with no prior notice.
Adamson Systems Engineering |
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
S7 User Manual
3
4
5
6
7
8
9
Page 1

Advertisement

loading

Summary of Contents for Adamson S7

  • Page 1 Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
  • Page 2 S7 User Manual Distribution Date: August 15, 2022 Copyright 2022 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.
  • Page 3: Table Of Contents

    Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
  • Page 4: Product Introduction

    7” transducers and a 3” compression driver mounted on an Adamson waveguide. • Up to 16 S7 can be flown in the same array when using the Ultra-Compact Support Frame (930-0025) and up to 8 when using the Ultra-Compact Micro Frame (930-0027). •...
  • Page 5: Wiring

    Wiring The S7 (971-0001) comes with 2x Neutrik Speakon™ NL4 connections, wired in parallel. • • Pins 1+/- are connected to the 2x ND7-LM16 MF transducers, wired in parallel. • Pins 2+/- are connected to the NH3-8 HF transducer. S7 Jackplate...
  • Page 6: Amplification

    Amplification The S7 is paired with Lab Gruppen PLM+ Series amplifiers. Maximum quantities of the S7, or S7 paired with S118 per amplifier model are shown below. For a master list, please refer to the Adamson Amplification Chart, found here on the Adamson website.
  • Page 7: Presets & Control

    Presets Adamson Load Library contains presets designed for a variety of S7 applications. Each preset is intended to be phase-aligned within the EQ overlap region with either S118 or S119 subwoofers. For a master list, please refer to the Adamson PLM & Lake Handbook.
  • Page 8: Technical Data

    Maximum Peak SPL ** 138 dB Components LF 2x ND7-LM16 7” Kevlar® Neodymium Driver Components HF Adamson NH3-8 3” Diaphragm / 1.4” Exit 527 mm / 20.75 in Compression Driver Nominal Impedance LF 2 x 16 Ω (8 Ω) Nominal Impedance HF 8 Ω...
  • Page 9: Accessories

    Accessories There are a number of accessories available for the Adamson S7 line array cabinets. The list below is only a few of the accessories available. Ultra-Compact Support Frame (930-0025) Support frame for S7, CS7, S118, and CS118 enclosures Ultra-Compact Line Array Micro Frame...