Adamson S10p User Manual
  1. Manuals
  2. Brands
  3. Adamson Manuals
  4. Speakers
  5. S10p
  6. User manual

Adamson S10p User Manual

Hide thumbs

Advertisement

Table of Contents

Table of Contents
Safety & Warnings
Read these instructions, keep them available for reference.
This manual can be downloaded from
Heed all warnings and follow all instructions.
A qualifi ed technician must be present during the installation and use of this product. This product
is capable of producing extremely high sound pressure levels and should be used according to the
specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will
not be liable for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such as when the
loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not
operate normally. Inspect your products regularly for any visual or functionality irregularities.
Protect the cabling from being walked on or pinched.
View the S-Series Rigging Tutorial video and/or read the S-Series Rigging Manual before suspending
the product.
Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual.
Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker
system.
This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around
the enclosure with data storage devices such as hard drives.
In an effort to continuously improve its products, Adamson releases
updated accompanying software, presets and standards for its products.
Adamson reserves the right to change the specifications of its
products and the content of its documents with no prior notice.
Adamson Systems Engineering |
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
S10p User Manual
3
4
5
6
7
8
9
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S10p and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Adamson S10p

Summary of Contents for Adamson S10p

  • Page 1 Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
  • Page 2 S10p User Manual Distribution Date: August 15, 2022 Copyright 2022 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.

  • Page 3: Table Of Contents

    Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.

  • Page 4: Product Introduction

    The operational frequency range of the S10p is 60 Hz to 18 kHz, +/- 3 dB. • The S10p is intended to be used as either a standalone system, or a fill enclosure in tandem with other S-Series products. The S10p is designed to pair easily and coherently with Adamson subwoofers.

  • Page 5: Wiring

    S10p Wiring The S10p (70x40 - 963-0008/100x50 - 963-0010) comes with 2x Neutrik Speakon™ NL4 connections, wired in • parallel. • Pins 1+/- are connected to the 2x ND10-LM MF transducers, wired in parallel, pins 2+/- are connected to the NH3-...

  • Page 6: Amplification

    The S10p is paired with Lab Gruppen PLM+ Series amplifiers. Maximum quantities of the S10p per amplifier model are shown below. For a master list, please refer to the Adamson Amplification Chart, found here, on the Adamson website. PLM 5K44...

  • Page 7: Presets

    S10p Presets Adamson Load Library, contains presets designed for a variety of S10p applications. These presets are designed to pair with either Adamson subs, or Adamson Line Arrays. For a master list, please refer to the Adamson PLM & Lake Handbook.

  • Page 8: Technical Data

    Maximum Peak SPL ** 139 dB Components LF 2x ND10-LM 10” Kevlar® Neodymium Driver Components HF Adamson NH3-8 3” Diaphragm / 1.4” Exit Compression Driver Nominal Impedance LF 8 Ω (2 x 16 Ω in parallel) Nominal Impedance HF 8 Ω...

  • Page 9: Accessories

    S10p Accessories There are a number of accessories available for the Adamson S10p point source cabinets The list below is only a few of the many available accessories. Sub-Compact Horizontal Bracket (934-0034) S10p/CS10p Horizontal Yoke Sub-Compact Vertical Bracket (934-0037) S10p/CS10p Vertical Yoke...

Table of Contents