Parts List - Kettler 0193321-2100 Assembly Instructions Manual

Parts List

You should have 2 fixing bags containing the following:
1 Screw Cap
x20
5 Washer
x20
Do not discard any of the packaging until you have checked
that you have all the parts and the pack of fixings.
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of fittings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened
during initial assembly. Only upon completion of the assembly should all fixing points
be fully tightened.
5. We recommend a periodic check on all fixing points to make sure they remain fully tightened.
6. Keep fittings out of children's reach.
7. You will require a Phillips head screwdriver in addition to the tools provided. Do not use any
other tools other than those recommended to build this product.
8. Please do not use substitute parts. Use only additional or replacement parts supplied
by Kettler.
9. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk/shop.
2
Screw (M6*20)
x8
6 Screw
x16
3
Screw (M6*30)
x4
7 Allen Key
x1
4 Screw (M6*40)
x8
O Glass Fixing
Brackets
x8