Kettler 0193321-2100 Assembly Instructions Manual page 5

Important Safety Information
• Any guard or other protective device
removed for servicing the appliance
shall be replaced prior to operating the
appliance.
• Installation and repair should be done by
a qualified service person. The appliance
should be inspected before use and at
least annually by a qualified service
person. More frequent cleaning may be
required as necessary. It is imperative that
the control compartment, burners and
circulating airways of the appliance are
kept clean.
Minimum clearance
Min.
Clearance
48 in
(121.9cm)
IF APPLICABLE:
• Allow heating item to cool completely
• DO NOT use heating item while lid is
Min. Clearance
48 in (121.9cm)
Min. Clearance
48 in (121.9cm)
before placing on lid.
installed. Always remove the lid while
heating item is in use.
Combustible materials should
not be within 72 inches of the
top of the unit, or within 48
inches around the entire unit.
Min.
Clearance
48 in
(121.9cm)