Kettler 0193321-2100 Assembly Instructions Manual page 10

Assembly
7
Assemble the Glass Screen
Attach the glass (P) and glass (Q)
to the eight fixture parts (B), using
sixteen screw (6). Do not over
tighten.
8
Place propane gas tank (not
included) into the metal stand (F).
Make sure the gas tank sits on the
metal stand (F) completely. Turn
the preassembled wing screw on
the outer part of metal stand (F)
clockwise to secure the propane
gas tank tightly.
9
Turn the cylinder valve on the tank
clockwise to close the propane
tank. Attach the preassembled
regulator from the table top (B) to
the cylinder valve by turning the
regulator coupling nut clockwise.
Make sure it is fastened securely
and tighten connections by
hand only.
O
P
Q
Cylinder valve
Black coupling nut
(turn clockwise to
connect)
Regulator
6 6
P
Pressure
relief valve
Bleed-
off
valve
turn
clockwise
to reseal