Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Base
DISASSEMBLING
Fig. 11
5. Insert 1R003 into Pipe 20-128 and open it
fully in the Pipe to grip its internal surface.
And pull out the Pipe while twisting them.
No.1R003
ASSEMBLING
Take the reverse step of Disassembling (Fig. 11, Fig. 10, Fig. 9).
Assemble Rubber block assembly to the base (Fig. 12).
Fig. 12
Fit Rubber block to inside of Rubber case. And assemble them to Base (Fig. 10).
Rubber block
Pipe 20-128
Rubber case
6. Remove Torsion spring 24.
Now Motor unit is separated
from Base.
Torsion spring 24
P 7/ 9
Motor unit
Advertisement
