Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Vise section
ASSEMBLING
Take the reverse step of Disassembling (Fig. 7).
Chain has to be fixed to Screw guide on the side where Protrusion is furnished (Fig. 8).
Fig. 8
[3]-4. Base
DISASSEMBLING
Disassemble Base from Motor unit (Fig. 9, Fig. 10, Fig. 11).
Fig. 9
1. Secure the motor unit with
chain on the rear side.
Fig. 10
4. Remove chain from hanger
of Handle and move the motor
section up to upper dead end,
till the torsion spring has no
recoil tension.
Align the Chain with the Protrusion on Screw guide.
2. Unscrew M6x12 Pan
head screw and remove
Spark guard.
Chain
M6x12 Pan head screw
M8x30 Pan head screw
Protrusion on
Screw guide
Spark guard
5. Lay the machine down carefully.
M10-17 Hex nut
Chain
Spring washer 10
3. Remove Rubber case and
Rubber block.
Rubber case
6. Remove M10-17 Hex nut, Flat
washer 10 (2pcs.), M10-140
Hex bolt.
Flat washer 10
Flat washer 10
M10-140
Hex bolt
P 6/ 9
Rubber
block
Advertisement
