OVERALL DIMENSIONS - mm CHARACTERISTICS Pressure Flowrate Pump Rotation speed max. (rpm) (bar) 750 Diesel oil and fuel oils of viscosity less than or equal to 80/110 cSt. CC20 600 Gasoline, kerosene, solvents, fuel oils of viscosity between 80 and 400 cSt. 500 Fuel oils of viscosity between 400 and 750 cSt.
Page 3
The operator should remain nearby the equipment through- out the use to ensure the proper functioning of the system. NT 1010-C00 01.13 CC20 pump e...
Page 4
ORIENTATION AND REVERSING OF BYPASS Bypass orientation Reversing bypass The bypass will protect the pump only for one direction of Unscrew cap 833 and loosen adjusting nut 834 so as to relax rotation, but can be reversed. It is therefore important to spring 824 as much as possible.
Page 5
SCRAPPING The pump must be scrapped in compliance with the regula- During this operation, particular care must be paid to the drai- tions in force. nage stages of the pump. BLOCDIR SHAFT SEAL Operation Assembly Rotary seal 697 rotates with shaft 501 thanks to 2 tongues fit- Check rings 605, 707 and 616 (of rotary seal).