Email Notifications - Dataprobe iPIO-8 Manual

SNMP Factory Defaults
Read Community:
Read/Write Community:
Notification Timeout:
Notification Retry Count:
Lead Configuration Change:
Download the MIB from the iPIO support pages at
The iPIO is configurable for what events trigger SNMP Traps. See section
•
Input. Email on any input change
•
Relay. Email on any relay change
•
Communication. Email on any change in communication status to the remotes.
•
Configuration. Email on any configuration change.
5.4.

Email Notifications

The iPIO will send email for a number of events. Up to two email addresses can be specified to receive
emails. The types of events that generate emails are also configurable. See section
events that can generate emails are:
•
Input. Email on any input change
•
Relay. Email on any relay change
•
Communication. Email on any change in communication status to the remotes.
•
Configuration. Email on any configuration change.
Email Syntax for input change
From: <your from account>
Date: Thu, Oct 3, 2013 at 5:14 PM
Subject: Input Change
To: <your to address>
<Location Name of iPIO>
Input <input number>
Example:
From: <mydataprobe@comcast.net>
Date: Thu, Oct 3, 2013 at 5:14 PM
Subject: Input Change
To: testlab@dataprobe.com
Shop Floor - Houston
Input 16 Back Door
Other emails use similar syntax.
iPIO-2816_v180808n
public
private
1 second
3
0 seconds
http:dataprobe.com/support-ipio
<input name> is <state name>
is Open
iPIO-2, iPIO-8, iPIO-16 Users Guide
7.5 SNMP Setup
7.3 Email Setup. The
Page 12