Start The Measurement - Vive DMD1001 User Manual

uncrossed, feet flat on the floor,
back and arm supported. Follow
these steps for accurate results:
• Resting For 5 minutes before
• Wait at least 3 minutes between
measurements. This allows your
blood circulation to recover.
• For a meaningful comparison,
try to measure under similar
conditions.
take daily measurements at
approximately the same time,
position of upper arm, or as
directed by a physician.

Start the Measurement

1. Before
measurement, switch the User
button to select the user between
User A and User B. Switch to right
to select User A, switch to left to
select User B. When the monitor is
off,press the "START/STOP button to
turn on the monitor, and it will
finish the whole measurement.
And save the measurement data
for the desired user. (See image
above.)
For example,
you start
LCD display
Adjust the zero.
the
Inflating and measuring.
12