Delete The Records; Information For User; Tips For Measurement - Vive DMD1001 User Manual

3. If you want to look over another
user's data, switch the User button
to select the desired user. Then
you can look over its historical
records.
CAUTION
!
The most recent record (1) is shown
first. Each new measurement is
assigned to the first (1) record. All
other records are pushed back
one digit (e.g., 2 becomes 3, and
so on), and the last record (500)
is dropped from the list.

Delete the Records

If you did not get the correct
measurement, you can delete
each user A & B results by following
the steps below.
1. Hold pressing the "S" button for
3 seconds when the monitor is
in the memory recall mode, the
flash display "dEL ALL" will show.
2. Press the "S" button to confirm
deleting and the LCD will display
"dEL dOnE", and then turn off.
3. If you don't want to delete the
records, press "START/STOP" button
to escape.

INFORMATION FOR USER

Tips for Measurement

It can cause inaccuracy if the
measurement is taken in the
following circumstances.
1. Within 1 hour after eating or
drinking.
2. Within 20 minutes after taking a
shower/bath.
3. In a very cold environment
4. Immediate measurement after
tea, coffee, or smoking.
5. When talking or moving your
fingers.
6. When you need to urinate.
14