Vive DMD1001 User Manual page 4

CAUTION
!
• This device is intended for adult
use only.
• This device is intended for
non-invasive
monitoring of arterial blood
pressure. It is not intended for
use on extremities other than
the arm or for functions other
than obtaining a blood pressure
measurement.
• Do not confuse self-monitoring
with self-diagnosis.
allows you to monitor your blood
pressure. Do not begin or end
medical treatment.
your physician for treatment or
advice.
• If you are taking medication,
consult your
determine the most appropriate
time to measure your blood
pressure. Never
prescribed medication without
consulting your physician.
• If the cuff pressure exceeds
40kPa (300 mmHg), the unit will
automatically deflate. Should the
cuff not deflate when pressure
exceeds 40 kPa (300 mmHg),
detach the cuff from the arm
and press the START/STOP button
to stop inflation.
• To avoid measurement errors,
carefully read
before using the product.
• The equipment is not AP/APG
equipment and not suitable
for use in the presence of a
measuring and
This unit
Consult
physician
change
this manual
flammable anesthetic mixture
with air of with oxygen or nitrous
oxide.
• The operator shall not touch
output of batteries and the
patient simultaneously.
• To avoid measurement errors,
please avoid the condition of
strong
radiated
or electrical
burst signal when using the AC
adaptor.
• The user must check that the
equipment functions safely and
see that it is in proper working
condition before being used.
• Please use ACCESSORIES and
detachable
to authorized
Otherwise, it may cause damage
to the unit or danger to the user/
a patients.
• Manufacturer
available
diagrams, component parts list,
etc.
• This unit is not suitable for
continuous monitoring during
medical
operations.
patient's arm and fingers will
become anesthetic, swollen and
even purple due to a lack of
blood.
• Please use the device under the
environment which was provided
in the user manual. Otherwise,
the performance
4
electromagnetic
interference
fast
parts specified/
by MANUFACTURE.
will
on request
emergencies
Otherwise,
field
signal
transient/
make
circuit
or
the