Select The User; Start The Measurement - Vive DMD1001 User Manual

MEASUREMENT

Select the User

1.When the monitor is off, press SET button to turn on the monitor.
Press SET button again to select the User ID between User 1 and User 2.
2.When the desired User ID is shown, press START/STOP button
to confirm and the monitor will turn off. (Take User 1 for example.)
START
STOP
10

Start the Measurement

1.After correctly positioning the cuff and
selecting the User ID, press the "START/STOP"
button to turn on the monitor when the LCD
is off, and it will finish the whole measurement.
(Take User 1 for example.)
LCD display
Inflating and measuring.
2.Press the "START/STOP" to power
off, otherwise it will turn off
within 1 minute.
MEASUREMENT
START
STOP
Adjust the zero.
Display and save the
results.
START
STOP
11