Table of Contents
Advertisement
8.3.D. PARENTAL CONTROL
8.3.D.1. Receiver Lock
To lock receiver, select Receiver lock in the Parental Control menu and change it to On
mode using the left/right keys (
◀∙▶
).
8.3.D.2. Menu Lock
To lock the Main Menu, select Menu lock in the Parental Control menu and change it to
On mode using the left/right keys (
◀∙▶
8.3.D.3. Maturity Rate
Select Maturity Rate level with left/right keys (
8.3.D.4. Change PIN Code
You can change your PIN code from factory default value "0000" as follows: Select Change
PIN Code in the Parental Control menu using the up/down keys (
Then you will be asked for a new PIN code.
Once you enter a new PIN code, the receiver will ask you to enter it in again.
After you enter a new PIN code twice, the PIN code is changed permanently.
If you forget the PIN code, you have to contact the distributor to find out it.
8.3.E. RECEIVER UPGRADE
You can upgrade the software of this receiver through serial port when the new software is
released.
Please contact the distributor for receiver upgrade.
Distributor supports you useful information and new software for the receiver.
24
This function prevents children or unauthorized
people from watching programs.
Also you can change PIN code. Select Parental
Control menu in Installation menu. The screen on
the left will be displayed.
Press the MENU key or EXIT key to return to
previous menu.
).
).
◀∙▶
▲∙▼
). Press OK key.
8.3.F. TIME SETTING
You can adjust date and time in Time Setting menu.
And you can switch on/off the receiver using this
menu.
Select Time Setting menu in the Installation menu
and the screen on the left will be displayed.
Press the MENU key or EXIT key to return to
previous menu.
: Select manual or auto. In auto mode, the receiver is using the time code
Mode
from satellite signal. In manual mode, user can set the time manually.
Time Adjustment
: Set the time offset from the UTC (GMT) (Auto mode only).
Current date
: The current date is indicated (manual mode only).
Current time
: The current time is indicated (manual mode only).
: Enable or disable the Summer Time(Auto mode only).
Summer Time
On time
: Set the time when the receiver will be automatically turned on.
: Set the time when the receiver will be automatically turned off.
Off time
8.3.G. FACTORY DEFAULT
This is to restore the factory set values in case the user has encountered some problems
after changing any new values of channel data and others, which may be in error.
Select Factory Default menu in Installation menu and press OK key.
If you want to continue, select Yes cell.
The receiver will be reset to settings automatically.
Please note that the Factory Default procedure may take a few seconds.
25
Advertisement
Table of Contents
