Table of Contents
Advertisement
* 1.3(USALS) only.
: It is the longitude of the selected satellite. It is set automatically as the
Sat Position
selected satellite. And you can enter the position value using numeric
keys.
: It means the longitude of your location. You can select the value using
Longitude
the left/right keys(
: It means the latitude of your location. You can select the value using the
Latitude
left/right keys(
◀∙▶
8.3.B. CHANNEL SCAN
It will be more convenient to use Channel Scan procedure when you want to search channel
for a specified transponder offered from the satellite.
As in Antenna Setup, Channel Scan also searches all channels broadcasted over a
specific transponder using its predefined information.
You can add a new transponder if you cannot find it on the predefined transponder list.
Select Channel Scan menu in Installation menu, and the following screen will be displayed.
Check the signal strength and press EXIT key.
Select the Search/Edit TP icon using the left/right keys(
Press OK key and select the desired transponder using the up/down keys(
key to start the scan procedure for selected transponder.
You can see the progressive status of channel searching.
22
or numeric keys.
◀∙▶)
) or numeric keys.
8.3.B.1 Channel Scan
Select the desired satellite using the left/ right keys
(
◀∙▶
).
Select the Antenna Configuration icon using the
browse keys(
▲∙▼
,
◀∙▶
).
Select the LNB Setting using the left/right keys(
▶
) then you can set LNB Power, LNB Type, LNB
Freq., 22KHz with left/right keys(
) at each field.
◀∙▶
Press EXIT key and set Search Option, DiSEqC1.0
fields to the appropriate value using the left/right
keys(
◀∙▶
) at each field.
◀∙▶
).
). Press OK
▲∙▼
If you cannot find the desired transponder from the transponder list, you can add it by
inputting appropriate parameter values for a new transponder using the
When you want to change the parameter of an existent transponder, select the parameter
using the
key, change its value and press the EXIT key.
F2
Correctly set various parameters.
When you want to delete newly added transponder, delete the transponder using the
key. And you can add your own transponder using the
Press the MENU key or EXIT key to return to previous menu.
Freq.
S/R
Polarity
FEC
8.3.B.2. Add Satellite
You can add a new satellite. Select the Add Satellite icon using the left/right keys (
and press the OK key. Select the Search/Edit TP icon using the left/right keys(
the OK key and add a new transponder using the
parameters of the transponder. The default name of the added satellites is "User SAT-No".
8.3.B.3. Delete Satellite
You can also delete the user satellite. Select the satellite that you want to delete from the
◀∙
satellite list. Select the Delete Satellite icon using the browse keys (
Press the OK key, and the selected satellite will disappear.
8.3.C. CHANNEL COPY
key.
F4
: Input the frequency of the transponder you want to find manually.
: Input the symbol rate of the transponder you want to find.
: Select the polarization of the transponder you want to find. In the case of
horizontal, 18V and in the case vertical, 13V are output through LNB line.
: Select the FEC of the transponder you want to find. You can select the
value of 1/2, 2/3, 3/4, 5/6, 7/8 or auto.
key. You should set various
F1
This function provide you with transferring channels
from tuner A(B) to tuner B(A).
Select the Direction, Tuner A >>> B or Tuner B
>>> A using the left/right keys(
Then select the Transfer menu and press the OK
key. If you copy channel A >>> B, you connect the
same satellite of tuner A to tuner B. Then, It will work
in Tuner B. Press the MENU key or EXIT key to
return to previous menu.
key.
F1
F3
)
◀∙▶
◀∙▶
). Press
,
).
▲∙▼
◀∙▶
).
◀∙▶
23
Advertisement
Table of Contents
