Installing A 5¼" Internal Hard Disk Drive - Sony PCV-R532DS Digital Studio Reference Manual

Removing, Installing, and Replacing Components
Installing a 5¼" Internal Hard Disk Drive
Your system comes with an available 5¼" bay to hold an additional 3½"
or 5¼" hard disk drive. The drive you install can access the front panel.
The hard disk drive access light blinks when either internal drive is
active.
!
Before opening the system unit, save any open files, exit the Windows
operating system, turn off the power of the computer and all attached
peripherals, and then unplug the power cord.
1
Configure the jumpers on the new drive as a secondary slave (see
your drive's documentation for configuration instructions).
2
Disconnect the power cord from the computer.
3
Remove the cover (see
4
Remove the front panel (see
5
Lay the system on its side (see following diagram).
"Removing the Cover"
"Removing the Front Panel"
®
Power connector
Jumpers
Drive connector
on page 22).
on page 24).
45
KY0084.VSD