VAIO Digital Studio™ Reference Manual
Installing a 3½" Internal Hard Disk Drive
Your system comes with an available bay to hold an additional 3½" IDE
hard disk drive. The drive you install must not require front panel access.
The hard disk drive access light blinks when either internal drive is
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
Configure the jumpers on the new drive as a slave device (see your
drive's documentation for configuration instructions).
Disconnect the power cord from the computer.
Remove the cover (see
Remove the four screws (A in next diagram) that secure the drive
holder to the top of the chassis.
"Removing the Cover"
on page 22).