Installing A 3½" Internal Hard Disk Drive - Sony PCV-J120 - Vaio Desktop Computer Reference Manual

40
VAIO® Reference Manual
Installing a 3½" Internal Hard Disk Drive
Your system comes with an available bay to hold an additional 3½" IDE
hard disk drive. The drive you install must not require front panel access.
The hard disk drive access light blinks when either internal drive is
active.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Configure the jumpers on the new drive as a slave device (see your
drive's documentation for configuration instructions).
2
Disconnect the power cord from the computer.
3
Remove the side panel (see
4
Lift the tab adjacent to the drive holder.
"Removing the Side Panel"
Power connector
Jumpers
Drive connector
KY0084.VSD
on page 22).