Product labels
(showing certification
information)
26
b) Care should be taken to limit dust accumulation on the exterior of the apparatus
to a depth not exceeding 5mm.
c) Maintenance of internal components while powered is limited to those actions
permitted in Section 5 of this manual.
8.4
Repair
The modules used in this product cannot be repaired by the user and must be
replaced with an equivalent certified product.
8.5
Marking
Each certified component is marked in compliance with the Directive and CE marked
with the Notified Body Identification Number.
This information applies to products manufactured during or after the year 2011.
Stainless Steel Enclosure
Barrier marking
Trunk surge protector marking
GRP Enclosure
Terminator marking
FB Module Carrier
INM 9370-RD Rev 5