Siemens SIMATIC IPC847C Getting Started page 25

Procedure
1. Press the on/off button.
2. Wait for the message to disappear.
3. Follow the instructions on the screen.
4. Make the region and language settings.
5. Type in the product key as required.
Result
The interface of the operating system is displayed every time you turn on the device and
after the startup routine.
SIMATIC IPC847C
Getting Started, 06/2011, A5E02669190-03
The green POWER LED lights up. The module carries out a self-test. During the self-test,
the following message appears:
Press <F2> to go to Setup Utility
Press <F12> to go to Boot Manager
If you want your system language to be international, select English. Information on
changing the regional and language settings at a later time is available in the chapter
"Setting up the language selection by means of the Multilanguage User Interface (MUI)"
in the operating instructions.
Note
Once the operating system has been set up, the device may restart.
The product key is located on the "Certificate of Authentication", in the "Product Key" line.
Commissioning
6.2 Initial commissioning
25