Table of Contents
Advertisement
3
The SDP files in the root folder of the SDHC/SDXC card are displayed (max.
8 files per slot). However, if the file name is long and cannot be displayed on
the menu screen, the file will be displayed with part of the file name omitted.
Select an SDP file to import from the list of displayed SDP files.
4
Select an import destination from areas 1 to 4 to start importing. If you select an
area where a file name is already displayed, a confirmation screen asking whether
to overwrite will appear. It will take about 20 to 30 seconds to complete the import.
"Complete" will be displayed at the end. A gray display area indicates insufficient
space and it cannot be selected. Select another area or delete SDP files that are not
required in advance in [Main Menu] → [Overlay Settings] → [Delete User Layout].
Caution:
● Do not turn off the power of the unit during import. You may lose the import
data.
In the case of import failure, the following messages may appear.
Error Message
Failed To Read File
From Media!
No User Layout
Exists.
Failed To Write File
To The Camera!
Import Error!
Status
• SD card is defective.
• SDP file data is corrupted..
• SDP file data is corrupted..
• The camera recorder version
is old and an unknown SDP
file has been imported.
There may be a problem with
the camera.
An internal error has occurred.
15
Action
• Use other SD card.
• Use the SDP file generated by
the SDP Generator.
• Use the SDP file generated by
the SDP Generator.
• Update the firmware for the
camera recorder to the latest
version.
Please contact the local dealers in
your area.
Please contact the local dealers in
your area.
Advertisement
Table of Contents
