Checking The Connections; Basic Operations; Selecting The Component - Sony HT-SL7 Operating Instructions Manual

Multi channel surround setup
(continued)
Tip
In addition to outputting the test tone, you can also
adjust the level of each speaker while listening to the
sound of a CD or DVD, etc. Although you lay the
foundation for high quality surround sound by
matching the levels of all speakers using the test tone,
it may be necessary to make further adjustments
while listening to playback of actual software. This is
because most software contains center and surround
channels recorded at slightly lower levels than the
two front channels.
When you actually playback software recorded in
multi channel surround you will notice that increasing
the center and surround speaker levels produces a
better blend between the front and center speakers
and greater cohesion between the front and surround
speakers. Increasing the level of the center speaker
about 1 dB, and the surround speakers about 1~2 dB
is likely to produce better results.
In other words, in order to create a more cohesive
soundstage with balanced dialog we recommend that
you make some adjustments while playing your
software. Changes of only 1 dB can make a huge
difference in the character of the soundstage.

Checking the connections

After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
1
Press ?/1 to turn on the receiver.
2
Press a function button to select a
component (program source) that you
connected (e.g., DVD player).
3
Turn on the component and start
playing it.
4
Rotate MASTER VOLUME to turn up the
volume.
If you do not obtain normal sound output after
performing this procedure, see
"Troubleshooting" on page 27 and take the
appropriate measures to correct the problem.
GB
18

Basic Operations

Selecting the component

Function buttons
Press a function button to select the component
you want to use.
To select
VCR
DVD player
Digital satellite tuner (etc.)
Tuner
An audio/video
component
After turning on the component you selected,
select the component and play the program
source.
MULTI CH IN
Press MULTI CH IN to enjoy the audio source
connected to the MULTI CH INPUT jacks with
the video from the selected component.
• When the MULTI CH IN is selected, the sound
field and surround parameters do not function.
MUTING
Press MUTING to mute the sound. MUTING
appears on the display when the sound is
muted. The muting function is canceled when
turning the power off, or disconnecting the
power cord.
PHONES
Use the PHONES jack to connect headphones.
• When the headphones are connected, speaker
output is automatically cancelled.
Press
VIDEO
DVD
TV
TUNER FM/AM
AUX