Hdmi Jacks - Sony HT-SF1000 Operating Instructions Manual

Connecting components with

HDMI jacks

(Except for models of area code
MX, E51, AR)
HDMI is the abbreviated name for High-
Definition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format.
ANTENNA
AM
U
OPT IN OPT IN
SA-CD/CD VIDEO 2
A HDMI cable (not supplied)
We recommend that you use a Sony HDMI cable.
Notes on HDMI connections
• This receiver may not be able to transfer
video or audio signals with certain types of
components.
• The multi/stereo area audio signals of a
Super Audio CD are not output.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from a HDMI jack
may be restricted by the connected
component. If the image is poor or no sound
is output from the component connected via
the HDMI cable, check the setup of the
connected component.
20
GB
DVD player
A
SA-CD/CD VIDEO 2 VIDEO 1
L L
R R
COAX IN
AUDIO IN AUDIO IN AUDIO IN
DVD
The sound is output from the TV speaker only
when a playback component and this receiver,
as well as this receiver and the TV are
connected via the HDMI jack. To output the
sound from the supplied speakers and to take
advantage of the multi channel surround
sound, be sure to
– connect the digital audio jacks on the
playback component to the receiver.
– turn off or mute the TV's volume.
Satellite tuner
A
HDMI
DVD IN VIDEO 2 IN
• Be sure to turn on the receiver, when video
and audio signals of a playback component
are being output to a TV through HDMI
jacks of the receiver. Unless the power is on,
neither video nor audio signals will be
transmitted.
• For details on HDMI setup of the connected
component, refer to operating instructions
supplied with the connected component.
TV monitor,
projector, etc.
A
MONITOR OUT
– + – + – +
FRONT R FRONT L SUR R
– +
SUR L