Sony HT-SF1000 Operating Instructions Manual page 7

Name Function
K OPT
Lights up when
– audio input mode for VIDEO 2
input is set to "V2 AUTO" and
the source signal is a digital
signal being input through
VIDEO 2 OPT IN jack (page
37).
– audio input mode for SA-CD/
CD input is set to "CD AUTO"
and the source signal is a
digital signal being input
through SA-CD/CD OPT IN
jack (page 37).
– audio input mode for VIDEO 2
input or SA-CD/CD input is set
to "V2 OPT" or "CD OPT"
(page 37).
L ;PL(II)
Lights up when the receiver
applies Pro Logic processing to 2
channel signals in order to output
the center and surround channel
signals. "; PLII" lights up
when the Pro Logic II Movie/
Music decoder is activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format signals.
M DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and the audio
input mode for VIDEO 2 input
or SA-CD/CD input is not set to
"V2 ANLG" or "CD ANLG"
(page 37).
N SW
Lights up when the audio signal
is output from the
SUBWOOFER jack.
continued
7
GB