Sony HT-SF1000 Operating Instructions Manual page 24

Tips
• You can also fix the optimizer microphone to a
tripod (not supplied) and place the tripod at your
listening position.
• Be sure to remove any obstacles in the path
between the optimizer microphone and the
speakers.
• When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.
Performing Auto Calibration
TV/VIDEO AUTO
SLEEP CAL
AUTO
CAL
VIDEO 1 VIDEO 2
2CH A.F.D.
1 2
4 5
7 8
>10/
-
0/10
CLEAR
DISPLAY
F
Control
G
button
f
RETURN/EXIT
Press AUTO CAL.
The following appears on the display.
A.CAL [5] t A.CAL [4] t A.CAL [3] t
A.CAL [2] t A.CAL [1]
24
GB
TV ?/1
AV
?/1
?/1
?/1
switch
SYSTEM STANDBY
DVD SA-CD/CD
Input
buttons
TUNER AMP MENU
MOVIE MUSIC
DUAL MONO
3
FM MODE
6
D.TUNING
9
D.SKIP
MEMORY DVD MENU
ENTER
MUTING
TOOLS
MUTING
TV VOL
MASTER VOL
g
MASTER
VOL +/–
MENU
The table below shows the display when
measurement starts.
Measurement for
Environment noise level
Speaker connection
Speaker level
Speaker distance
* The corresponding speaker indicator lights up in
the display during measurement.
When measurement ends, "COMPLETE"
appears on the display and the settings are
registered.
Notes
• Auto Calibration cannot detect the sub woofer.
Therefore, all sub woofer settings will be
maintained.
• The measurement process will take a few minutes
to complete.
Tips
• When Auto Calibration starts:
– Stand some distance from the speakers and the
listening position to avoid measurement failure.
This is because test signals are output from the
speakers during measurement.
– Avoid making noise to get a more accurate
measurement.
• The Auto Calibration function will be canceled
when you do the following during the
measurement process:
– Press ?/1 or MUTING.
– Press input buttons on the remote or INPUT
SELECTOR on the receiver.
– Change the volume level.
– Press AUTO CAL again.
Display
NOISE.CHK
MEASURE and SP
DET. appears
alternately*
MEASURE and
GAIN appears
alternately*
MEASURE and
DISTANCE appears
alternately*