Specifications - Sony HT-SF1000 Operating Instructions Manual

Specifications

Amplifier section
HT-SF1000 only
1)
Power Output
Stereo mode (rated) 70 W + 70 W
(4 ohms at 1 kHz, 0.7%)
Music power output (reference)
FRONT
(With SS-FSP1000)
CENTER
(With SS-CNP1000F)
SUR
(With SS-FRP1000)
SUBWOOFER
(With SS-WP1000)
HT-SS1000 only
1)
Power Output
Stereo mode (rated) 70 W + 70 W
(4 ohms at 1 kHz, 0.7%)
Music power output (reference)
FRONT
(With SS-MSP1000)
CENTER
(With SS-CNP1000)
SUR
(With SS-SRP1000)
SUBWOOFER
(With SS-WP1000)
1)
Measured under the following conditions:
Area code Power requirements
CEL, CEK, AR, SP 230 V AC, 50 Hz
E51
AU, 240 V AC, 50 Hz
MX 127 V AC, 60 Hz
2)
Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
SA-CD/CD, Sensitivity: 1 V
VIDEO 1, 2 Impedance: 50 kohms
2)
: 143 W/ch
2)
: 143 W
2)
: 143 W/ch
2)
: 285 W
2)
: 143 W/ch
2)
: 143 W
2)
: 143 W/ch
2)
: 285 W
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
VIDEO 2, SA-CD/ Sensitivity: –
CD (Optical) Impedance: –
Reproduction frequency range:
28 – 20,000 Hz
Tone
Gain levels ±6 dB, 1 dB step
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code CEL, CEK, AU,
With 9-kHz tuning scale:
531 – 1,602 kHz
Models of area code E51
With 10-kHz tuning scale:
530 – 1,610 kHz
With 9-kHz tuning scale:
531 – 1,602 kHz
Models of area code AR, MX
With 10-kHz tuning scale:
530 – 1,610 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
3)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down PRESET
TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
SP
3)
3)
continued
57
GB