Advertisement
USING THE
7
ULTRA-TRAK
7.0 - MAIN AREAS
A
Begin pulling in a straight line.
B
Once the initial line is complete, a "wet edge" must be maintained with an
overlap of 3 to 4 inches per pass.
C
Stay 3 inches away from the edges to avoid finish accumulation at the edges.
D
Between coats, cover the head assembly with the black Velcro vinyl bag in to
protect the manifold and pad from drying out.
7.1 - FOR SMALL AREA
EDGES & CORNERS:
WE RECOMMEND THE
MICRO-TRAK
A
Use the Micro-Trak detail
applicator for edges & corners.
B
Use on the first and/or last
coat to speed up the process.
THE MICRO-TAK
ALTERNATIVELY...
For areas too large for a Micro-Trak, and
too small for convenient use of an Ultra-
Trak, consider the Sting-Ray. Its easy
product dispensing and 18" applicator
provides for smooth and even coating of
medium-sized surface areas.
THE STING-RAY
Advertisement
