Advertisement
PRODUCT
6
FLOW RATE
6.0 - PRODUCT FLOW RATE: TIMER SETTING
A
The Ultra-Trak dispenses product when pulled. Each revolution of the wheels
activates the pump and dispenses solution.
B
The amount dispensed is controlled by the timer setting.
C
Flow rate is usually between 2-5 on the dial, depending on the requirements of
your coating product..
D
Walk the Ultra-Trak about 25 feet and adjust the flow rate accordingly.
THE PUMP IS ONLY
ACTIVATED WHEN THE
MACHINE IS PULLED.
PUSHING THE MACHINE DOES
NOT ACTIVATE THE PUMP.
10 FEET AHEAD OF
COMPLETING A PASS, TURN
"OFF" THE POWER SWITCH TO
ALLOW FOR DISPENSER LINE
DRAINAGE. ONCE THE UNIT IS
POSITIONED FOR THE NEXT
PASS, TURN "ON" THE POWER
& RESUME WALKING SPEED.
Advertisement
