Advertisement
PLAN & PREPARE
10
10.0 - PLAN YOUR JOB EXIT
A
Near the completion of each job, raise the suction hose out of the solution
-container and use up the solution left in the system on the last 20 to 30 feet.
10.1 - PREPARE IN ADVANCE
A
A clean 5-gallon container of water (or solvent) approximately 1/3 full. This
is also a good place to keep the mop pad and black vinyl cover if it cannot be
rinsed out right away after a job is complete after you flush the unit first.
10.2 - REMOVE THE BLACK BAG & FINISH PAD TOGETHER
A
Drop the lift handle to the "second" hook & position over the black cleaning tray.
B
Remove excess water from the finish pad and wring it out and hang to dry.
10.1 - RECAP THE CONTAINER
A
Remove the factory container and recap the unused portion for future use.
Zero waste.
Advertisement
