Advertisement
TIPS FOR GETTING
THE BEST RESULTS
FRIENDLY ADVICE
EASY TIPS
A
Clean the unit after each shift - it only takes a minute.
B
Stay away from the baseboards/corners; people don't walk there!
C
Switch the unit "OFF" about 10 feet before making a turn. Then make the turn
and switch unit back "ON".
D
You can always turn the unit "OFF" and do unusual areas, as there is plenty of
chemical on the pad.
E
If the unit begins to streak or starve for lack of chemical STOP and check the
suction hose. Chances are, debris here is the cause of the issue.
F
Always have a full container ready to go! Check your factory container of
chemical on the unit occasionally so you don't run out during your work.
CONTACT US
WE ARE HERE TO HELP
ULTRA-TRAK TECH LINE
GENERAL ENQUIRIES
EMAIL US
OUR WEBSITE
PERSONAL ONLINE
TRAINING SESSIONS
WITH MARK
1 708 570 0650
1 800 840 3162
info@fas-trakind.com
www.fas-trakind.com
Schedule a personal Facetime
Training Session with Mark by
calling 708 250 5465.
Advertisement
