Advertisement
CLEANING UP
11
11.0 - HOW TO CLEAN THE PUMP SYSTEM
A
Clean the system with clear water or solvent, according to the flooring finish
applied, using the 5 gal pail.
B
Place the suction hose into the 5 gal pail and press the "manual pump" switch
to clean the system.
C
Run water for about 15 seconds till it is clear.
D
Remove suction hose and purge the water out.
CLEANING THE
12
HEAD ASSEMBLY
12.0 - HOW TO CLEAN THE HEAD ASSEMBLY
A
Remove the head assembly and rinse with cool water.
B
Remove the yellow end caps & verify the inside of the distribution tube is clean.
C
Use a scrub pad to remove any build up collected on the tube near the holes.
D
Use a paper clip to clear any blocked holes on the tube.
E
Place the yellow end caps back on the tube.
F
Reinstall back on the head assembly.
Advertisement
