Cisco MeetingPlace Express Troubleshooting Manual page 14

Helpful Information
Table 6-2
Code
(Dec)
131192
131198
196686
196848
196849
Administrator's Installation, Upgrade, and Troubleshooting Guide for Cisco MeetingPlace Express Release 1.1
6-14
Important Exception Codes in Cisco MeetingPlace Express (continued)
Code
(Hex) Severity Display Text
0x20078 MAJOR The CS is behind ## seconds.
Conf ##, Next Event ##, Time ##
0x2007E INFO No ports left to extend meeting.
Erc ##,Now ##, Length ##, Ports
##
0x3004E MINOR Too many conference events.
Next event = ##, Conf = ##, Max
events = ##
0x300F0 MINOR Allocation of access ports to
units has been fixed. Thank you!
0x300F1 MINOR Too many access ports compared
to licenses ##.
Chapter 6 Troubleshooting Cisco MeetingPlace Express
Comments
The conference management
software has fallen behind
processing conference life
cycle events. This can indicate
the system is overloaded. It
can be a normal result of a
system being down for a while.
Repeated alarms about a
failure to catch up may
indicate a software defect.
Recommended Action:
No action required.
The
Cisco MeetingPlace Express
system was unable to extend a
meeting due to lack of
available voice ports.
Recommended Action:
No action required.
Probably indicates too many
people entering or leaving a
meeting at the same time,
overloading the ability of the
Cisco MeetingPlace Express
system to queue up entry or
exit announcements.
Recommended Action:
No action required.
A "too many access ports"
condition (see error message
0x300F1) has been resolved.
Recommended Action:
No action required.
The configured number of
voice ports exceeds the
number of valid licenses,
where ## is the configured
value. This may be caused by
the license being temporary
expired.
Recommended Action:
No action required.
OL-6665-02