Changing The Display - Sony HT-4850DP Operating Instructions (primary manual) Operating Instructions Manual

Changing the display

Changing the information in
the display
You can check the sound field etc. by changing
the information in the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change cyclically as follows.
Index name of the input
Sound field currently applied
When the tuner is selected
*
t Frequency t Sound
Preset station name
field currently applied
* Index name appears only when you have assigned
one to the input or preset station (page 30). Index
name does not appear when only blank spaces have
been entered, or it is the same as the input name.
Adjusting the brightness of
the display
Press DIMMER repeatedly.
The brightness of the display will change in 3
steps.
*
t Selected input t
21 US