Amplifier Operation; Selecting The Component - Sony HT-4850DP Operating Instructions (primary manual) Operating Instructions Manual

Amplifier Operation

Selecting the component

1
Press input buttons to select the input.
To select the
VCR
Satellite tuner
DVD player
MD or tape deck
CD player
Built-in tuner (FM/AM) TUNER FM/AM
The selected input appears in the display.
2
Turn on the component and start
playback.
Note
If you select the VCR or DVD player, set the
TV's video input to match the component you
selected.
3
Turn MASTER VOLUME –/+ to adjust
the volume.
Note
To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.
To mute the sound
Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.
To use the headphones
Connect the headphones to the PHONES jack.
When the headphones are connected, speaker
output is automatically canceled and "SP" does
not light up in the display.
US
18
Press
VIDEO 1
or VIDEO 2
VIDEO 2
DVD
MD/TAPE
CD
When MULTI CHANNEL
DECODING indicator lights up
The MULTI CHANNEL DECODING indicator
lights up when the receiver is decoding multi
channel sources.
However, this indicator does not light up if you
select 2CH STEREO mode.