Table of Contents
Advertisement
1
MACHINE SAFETY GUIDELINES
1.1
Safety instructions
WARNING!
Please do not try to operate the machine until you have read and understood all descriptions,
regulations and safety caution items described in this manual. This machine is designed with
various safety devices to protect the operator and maintenance personnel, and to avoid acci-
dental injury and damage to the machine and equipment. However, operator and maintenance
personnel should not rely completely on such safety precautions. For the sake of operational
safety, retain this manual for reference.
1.2
Machine hoisting and handling safety
A forklift is recommended for handling. To handle this machine, the cutting fluid box should
be dismantled. Avoid moving the fulcrum, which may destroy mechanical structure or alter its
precision. In case site restrictions require use of a crane, ensure proper balance and protection
is obtained to avoid shaking and collision.
Safety caution items
1. The safety loading capacity of all handling machines or equipment should be higher than
the weight of the machine (including crane, forklift and hoisting equipment). In case of
doubt, inquire with the manufacturer of the handling equipment. Never handle equipment
by yourself without adequate knowledge, or the handling equipment or machine may be
damaged, and personnel may be injured. (For related weight of the machine, please refer
to 2.2; for handling method, please refer to 3.1.)
2. When a crane is used, to avoid damage to the machine, use the special hoist designed spe-
cifically for this machine and the correct way. Do not use a nonconforming hoist as it may
result in damage to the handling equipment or machine, or even personnel casualties.
3. Whatever method is used to hoist or handle the machine, when the machine is hoisted
5 cm above ground level, make sure to carefully check if the machine is balanced. Make
sure the machine is not moved in an unbalanced state, or it may cause casualties or dam-
age.
4. When the machine is hoisted or lowered, pay attention to its moving speed. If the speed is
too fast it will result in unpredictable swinging or collision, or the hoisted machine may
drop off in an unbalanced status, causing casualties or damage.
5. When the machine is being hoisted or handled, prohibit personnel from clinging
to the periphery or topside of the machine, and prohibit personnel clinging to the hoist
and cable, to avoid casualties.
6. When the machine is being hoisted or handled, prohibit personnel and vehicles from en-
tering the downside of the machine to avoid any accident.
7. To operate hoisting and handling equipment, actual operation shall be executed only by
qualified personnel who have received professional training and are certified by relevant
authorities. Prohibit operation by personnel who are not familiar with equipment condi-
tions to avoid an accident.
8. Before the machine is hoisted or handled, make sure to remove all objects around the ma-
chine. Any obstacles on the walking path should be removed. People should keep away
from the machine before the machine can be hoisted or handled to avoid damage or inju-
ry.
NCT Ipari Elektronikai Kft.
H-1148 Budapest, Fogarasi út 7.
Phone: +36 1 467 6300
www.nct.hu
MAINTENANCE MANUAL
4 / 32
MSL-200
CNC LATHE
10 September 2018
Advertisement
Table of Contents
