Adjustment Of Belt Tension - NCT MSL-200 Maintenance Manual

MSL-200
CNC LATHE
MAINTENANCE MANUAL
Note: Before install the hollow type chuck, please dismount soft jaw, anti-dust cover and
busing, but some chucks without anti-dust cover.
4.4

Adjustment of belt tension

Please loose screw nut A first, then adjust screw bolt to move motor bracket up or down.
Please lock screw nut A after adjusted belt tension to best condition.
NCT Ipari Elektronikai Kft. 26 / 32 10 September 2018
H-1148 Budapest, Fogarasi út 7.
Phone: +36 1 467 6300
www.nct.hu