Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Maxtang SKD70
Summary of Contents for Maxtang SKD70
- Page 1 SKD70 User Manual SKD70 Motherboard User Manual...
-
Page 2: Chapter 1 Product Introduction
SKD70 User Manual Chapter 1 Product Introduction 1.1 Main Information Based on Intel PCH B150 or H110, the SKD70 is mini-ITX motherboard, supporting Intel Skylake-S and Kabylake-S processors. 1.2 Specification Platform: PCH B150 (or H110) + Skylake-S/KabyLake-S CPU. Memory: 2 x SO-DIMM DDR4slots up to memory of 32GB, supports dual channel. -
Page 3: Motherboard Overview
SKD70 User Manual 1.3 Motherboard Overview LAN2/USB3.0 AUDIO HDMI + DP LAN1/USB3.0 LAN3/USB2.0 PCIE_1X PCIE_16X USB2.0 GPIO M.2_S MEMORY M.2_E PS/2 RS485 SATA1/2 RS232 POWER BTN USB2.0... -
Page 4: Chapter 2 Hardware
SKD70 User Manual Chapter 2 Hardware 2.1 Jumper Setup Set jumpers according to your needs before installing hardware. Tips about how to identify the first header of jumpers and interfaces: 1. Observe the mark beside plugs, the first header is usually marked by “1” or bold line or triangular symbol; 2. The first header is the square pad of pads on the back. - Page 5 SKD70 User Manual 2.4 Storage 2 x SATA3.0, 1 x M.2 Key B for 2242 SSD. 2.5 USB 4 x USB3.0, 2 x USB2.0, 1 x vertical USB2.0. The USB2.0 at rear panel are powered by 5V Standby voltage, and they can wake up computer by using the connected USB devices when computer is at turn off mode (power still connected) or sleep mode.
- Page 6 SKD70 User Manual 2.8 COM (Silk-print: JCOM1_4, RS485) 4 x RS232, optional feature: COM1 and COM2 with power supply of 5V or 12V, 1 x RS485. JCOM1_4: Signal Signal DCD# DTR# DSR# RTS# CTS# NC (can change to 5V or...
- Page 7 SKD70 User Manual LPT_ PPD0 ERROR LPT_ PPD1 INIT LPT_ PPD2 SLIN LPT_ PPD3 LPT_ PPD4 LPT_ PPD5 LPT_ PPD6 LPT_ PPD7 BUSY SLCT 2.10 M.2 expansion slot (Silk-print: M.2_E) 1 x Type 2230 (Key E) M.2 slot, supports WiFi card and other devices.
- Page 8 SKD70 User Manual MS_CLK 2.14 Power socket (Silk-print: JPOWER1) Front panel interface is to connect function buttons and indicator lights on the case. JPOWER1: Signal Signal HDD_LED+ PWR_LED+ HDD_LED- PWR_LED- RSTBTN+ PWR_ON+ RSTBTN- PWR_ON- blank 2.15 Auto Power On (Silk-print: JAT)
Need help?
Do you have a question about the SKD70 and is the answer not in the manual?
Questions and answers