Table of Contents
Advertisement
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
You can select the picture in pause mode.
[AUTO]: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[FRAME]: The picture, including subjects that
do not move dynamically, is output in high
resolution.
Settings for the HDMI
[HDMI SETUP]
HDMI SETUP
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
YC
C
/RGB(HDMI):
B
R
AUDIO(HDMI):
JPEG RESOLUTION:
x [HDMI RESOLUTION]
You can select the type of video signal that is
output from the HDMI OUT jack. For details,
see "To select the type of video signal output
from the HDMI OUT jack" (page 23).
[AUTO (1920
1080p)]: The system outputs
×
the optimal video signal for the connected TV.
[1920
1080i]: The system outputs 1920 ×
×
1080i* video signals.
[1280
720p]: The system outputs 1280 ×
×
720p* video signals.
[720
480p]**: The system outputs 720 ×
×
480p* video signals.
* i: interlace, p: progressive
** Depending on the country model, [720 × 480/576p]
may appear.
x [CONTROL FOR HDMI]
You can set the [CONTROL FOR HDMI]
function to on/off. This function is available
when you connect the system and TV with an
HDMI cable. For details, see "Using the Control
for HDMI Function for "BRAVIA" Sync"
(page 58).
[OFF]: Off.
[ON]: On. You can operate mutually between
components that are connected with an HDMI
cable.
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection.]
appears and you cannot set to [ON].
x [VOLUME LIMIT]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATRE, the System Audio Control
(page 60) is activated and loud sound may be
output depending on the volume level of the
AUTO
(1920x1080p)
system. You can prevent this by limiting the
OFF
LEVEL2
maximum level of the volume.
YC
C
B
R
OFF
SD
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]: Maximum volume level is set to 15.
[LEVEL1]: Maximum volume level is set to 20.
[OFF]: Off.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [YC
You can select the type of HDMI signal output
from HDMI OUT jack.
[YC
[RGB]: The system outputs RGB signals.
Note
• If the playback picture becomes distorted, set
[YC
• If the HDMI OUT jack is connected to a component
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
x [AUDIO (HDMI)]
You can select the audio output status from the
HDMI OUT jack.
[OFF]: The system does not output the sound
from the HDMI OUT jack.
C
/RGB (HDMI)]
B
R
C
]: The system outputs YC
B
R
C
] to [RGB].
B
R
C
signals.
B
R
C
].
B
R
49
GB
Hide quick links:
Advertisement
Table of Contents
