Inserting The Wireless Transceiver - Sony 3-298-611-11(1) Operating Instructions Manual

5 Inserting the wireless transceiver

You can transmit sound from the unit to an S-AIR product, such as a surround amplifier or S-AIR
receiver.
An S-AIR product is a component that is compatible with the S-AIR function.
To use the S-AIR function, you need to insert the wireless transceivers into the unit, surround amplifier,
and S-AIR receiver.
For details of the S-AIR function, see "Using an S-AIR Product" (page 71).
Rear panel of the unit
SPEAKER
DIGITAL IN
CENTER SUBWOOFER
COAXIAL OPTICAL
TV
Wireless
transceiver
Note
• When you insert the wireless transceiver, make sure that the AC power cord (mains lead) is not connected to a wall
outlet (mains).
• Do not touch the terminals of the wireless transceiver.
• Insert the wireless transceiver with the S-AIR logo facing up.
• Insert the wireless transceiver so that the V marks are aligned.
• Do not insert other than the wireless transceiver into the EZW-RT10 slot.
SPEAKER
FRONT R FRONT L SUR R SUR L
EZW-RT10
DC5V
0.7A MAX
HDMI OUT DMPORT
ANTENNA Note
• Also, insert the wireless
COAXIAL 75
FM AM
EURO AV
transceiver into the S-AIR
OUTPUT(TO TV)
receiver. For details, refer to
the operating instructions of
the S-AIR receiver.
19
GB