Using The Sleep Timer - Sony 3-295-946-12(1) Operating Instructions Manual

Listening/watching a connected
component through DMPORT
connection
1
Press DMPORT.
You can also use the INPUT SELECTOR
on the receiver to select "DMPORT".
2
Start playback of the connected
component.
The sound is played back on the receiver
and the image appears on the TV.
For details, refer to the operating
instructions supplied with the DIGITAL
MEDIA PORT adapter.
Notes
• Depending on the type of DIGITAL MEDIA
PORT adapter, you can operate the connected
component by using the remote. For details on
remote button operation, see page 8.
• Be sure you have made the video connection from
DIGITAL MEDIA PORT adapter to the TV (page
59).
• Depending on the DIGITAL MEDIA PORT
adapter, video output may not be possible.
Tip
When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press MUSIC repeatedly to select
"PORTABLE" (page 44).
60 GB

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
1-30-00 t 1-00-00 t 0-30-00
2-00-00 t
t OFF
When sleep timer is activated, the display dims
and "SLEEP" indicator lights up.
Note
If you press any buttons on the remote or receiver
after the display dims, the display brightens up.
After a while, the display dims again if no button is
pressed.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.