7: Adjusting The Speaker Levels And Balance (Test Tone) - Sony 3-295-946-12(1) Operating Instructions Manual

A. CAL menu parameters
You can use the A. CAL menu to make
settings for the Auto Calibration function to
suit your preference.
Select "8-A. CAL" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 33) and
"Overview of the menus" (page 34).
x AUTO CAL (Auto Calibration no/
yes)
• A.CAL NO
The Auto Calibration function is not
activated.
• A.CAL YES
The Auto Calibration function starts.
x CAL LOAD (Calibration load)*
• LOAD YES
Select this when you want to load the saved
Auto Calibration result.
• LOAD NO
Select this when you do not want to load the
saved Auto Calibration result.
* You can select this parameter only when you have
performed the Auto Calibration and saved the
settings.
28 GB
7: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
2CH A.F.D.
1 2
4 5
7 8
>10
-
0/10
CLEAR
DISPLAY
2-5
O
RETURN/EXIT
TV CH –
PRESET – REPLAY ADVANCE
<
.
1
Press AMP MENU.
"1-LEVEL" appears on the display.
2
Press or b to enter the
menu.
3
Press V/v repeatedly to select
"T. TONE".
4
Press or b to enter the
parameter.
MOVIE MUSIC
THEATRE
3
DVD/BD
MENU
6
AUTO CAL
D.TUNING
9
D.SKIP
1
MEMORY AMP MENU
ENTER
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
MASTER
VOL +/–
MENU/HOME
TV CH +
PRESET +
<
>