Sony 3-295-946-12(1) Operating Instructions Manual page 10

Name Function
O TV
Press TV and the button with
orange printing at the same
time to enable TV operation.
P RETURN/
Press to
– return to the previous menu.
EXIT O
– exit the menu while the
Press RETURN/EXIT O
and TV (O) at the same time
to return to the previous menu
or exit the TV's menu while
the menu is displayed on the
TV screen.
Q
After pressing AMP MENU
,
(I), DVD/BD MENU (F),
V/v/B/b
or MENU/HOME (M), press
V, v, B or b to select the
settings. Then, press
enter the selection if you have
pressed DVD/BD MENU or
MENU/HOME previously.
Press
selection of the receiver,
VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
R DISPLAY
Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (O)
at the same time to display
TV's information on the TV
screen.
S -/--
Press to select the channel
entry mode, either one or two
digit of the VCR.
Press -/-- and TV (O) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10 Press to select the track
numbers over 10 of the CD
player.
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button.
10 GB
menu or on-screen guide of
the VCR, DVD player,
satellite tuner or Blu-ray
disc player is displayed on
the TV screen.
also to enter the
Name
T Numeric
buttons
(number 5
U TV INPUT
SLEEP
to
a)
The number 5, TV VOL +/MASTER VOL + and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
b)
This button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Function
Press to
– preset/tune to preset
a)
)
stations.
– select track numbers of the
CD player, DVD player or
Blu-ray disc player. Press
0/10 to select track number
10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (O) at the same time to
select the TV channels.
Press TV INPUT and TV (O)
at the same time to select the
input signal (TV input or
video input).
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.