Sony 3-295-946-12(1) Operating Instructions Manual page 12

Installing the speakers on a flat
surface
Before you install the speaker and subwoofer,
be sure to attach the supplied foot pads to
prevent vibration or movement as shown in the
illustration below.
Example of HT-SS1300 front
speaker
HT-SF1300 only
You need to attach the supplied foot pads to
the center speaker and subwoofer only.
HT-SS1300 only
You need to attach the supplied foot pads to all
the speakers and subwoofer.
Installing the speakers on the
speaker stand
HT-SS1300 only
For greater flexibility in positioning the
speakers, use the optional WS-FV11 or
WS-FV10D speaker stand (available only in
certain countries). For details, refer to
operating instructions supplied with the
speaker stand.
HT-SF1300 only
For greater flexibility in positioning the
speakers, use the supplied speaker stand. For
details, refer to supplied speaker stand
installation guide.
12 GB
Installing the speakers on the
wall
You can install your speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
more than 25 mm
10 mm
Hook on the back of the speaker
2
Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
5 to 7 mm
4 mm
4.6 mm