Introduction To Slam ® Hornet; Technical Data; Certification Of Equipment - Saurya SLAM Hornet EM 1LED Instructions For Safe Use

1. Introduction to SLAM
This instruction manual guides you through the process of selecting and adopting SLAM® Hornet with
battery back up work light at your work site. The manual regards the following SLAM® Hornet types:
1.1

Technical data

®
SLAM Hornet EM 1LED, SLAM
Product model
SLAM
SLAM
SLAM
SLAM
1.2

Certification of equipment

®
The SLAM Hornet–series has been designed, tested and certified for portable use. There is "X" –
mark in the certificate for special conditions of safe use of the equipment. Special conditions of safe
use specifies:
·
Ambient temperature can be -20°C...+ 40°C without Ex-socket
·
With Ex-socket as specified for the used socket but within -20°C...+ 40°C
·
"ib"-marking is for internal protection of the switch in the emergency supply circuit. There is NO
need for Exi assosiated apparatus in the supply of the luminaire
The equipment is to be used properly and according to its ratings, documentation and local applicable
laws. Local, national certificates of these units may exist outside the region of EU.
The aforementioned SLAM
certificate beneath:
®
Hornet EXIT 1LED (later SHEM)
®
Hornet EM 1LED A
®
Hornet EXIT 1LED A
®
Hornet EM 1LED C
®
Hornet EXIT 1LED C
®
Hornet–types are certified as follows. You may find brief explanation of
3/16
®
Hornet
Dimensions / mm
L
708
708
Ø
115
115