Download Print this page

MadgeTech State101A Product Information Card

State data logger with 10 year battery life

Advertisement

Quick Links

Description
Input Range
Input Low
Input High
Internal Weak Pull-Up
Minimum Input Active (Low) Time
Resolution
Channels
Memory
406,323 readings; software configurable memory wrap
Reading Rate
LED Indicator
Required Interface Package
Baud Rate
Battery Life
Operating Environment
Material
Dimensions
Weight
Approvals
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F).
Specifications subject to change.
See MadgeTech's terms and conditions at www.madgetech.com
MadgeTech, Inc.
6 Warner Road
Phone 603.456.2011
www.madgetech.com
State101A
0 V to 30 V
<0.4 V
>2.8 V
<60 µA
10 Microseconds
4 Hz (reading rate selectable in software)
1
4Hz up to 1 reading every 24 hours
Red and Green
IFC200
115,200
10 years typical, dependent upon
frequency and duty cycle
-40 °C to +80 °C (-40 °F to +176 °F),
0 %RH to 95 %RH (non–condensing)
ABS plastic
1.4 in x 2.2 in x 0.6 in
(36 mm x 56 mm x 16 mm)
0.9 oz (24 g)
CE
Warner, NH 03278
l
Fax 603.456.2012
l
info@madgetech.com
l
DOC-1222035-00 REV 6 2014.12.16
Product Information Card
State101A
State Data Logger with 10 Year Battery Life
State101A
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
To view the full MadgeTech product line,
visit our website at
www.madgetech.com.

Advertisement

loading

Summary of Contents for MadgeTech State101A

  • Page 1 LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F). Red 485 Dark Blue Pantone 289 Specifications subject to change. Light Blue 58% of Pantone 289 See MadgeTech’s terms and conditions at www.madgetech.com MadgeTech, Inc. 6 Warner Road Warner, NH 03278 Phone 603.456.2011 Fax 603.456.2012...
  • Page 2 Prices and specifications subject to change. See MadgeTech’s terms and conditions at www.madgetech.com To send devices to MadgeTech for calibration, service or repair, please use the MadgeTech RMA Process by visiting www.madgetech.com, then under the services tab, select RMA Process.