Gigaset E290 Manual page 33

If you accept an incoming call, the baby monitor mode is suspended for the
duration of the call, but the function remains activated. The baby monitor
mode is not deactivated by switching the handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby.
The microphone must point towards the baby.
Activating the function reduces the operating time of your handset.
For that reason, place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched
off.
After switching on:
¤
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external
number.
Activating and setting the baby monitor
¤
Baby Monitor
Enable/disable:
¤
Activation
entered, the baby monitor is enabled immediately
Entering/changing call number:
¤
Call Target
External Call, enter phone number
Baby Monitor and the number to call are displayed when the baby monitor
is enabled and in idle mode.
Activate/deactivate two-way talk:
¤
Two Way Talk
Deactivate baby monitor / Cancel alarm
Deactivate the baby monitor:
Cancel the alarm:
OK
OK ( = enabled) . . . if a phone number to call is already
OK Select Internal or External Call
OK ( = enabled)
¤
In idle status press the display key Off
¤
Press the End call key
OK
during an alarm
Additional functions
OK for
33